Operation; Powering On/Off The Projector - ViewSonic PRO8450W VS13646 User Manual

Viewsonic projector user manual
Hide thumbs Also See for PRO8450W VS13646:
Table of Contents

Advertisement

Operation

Powering On/Off the Projector

Powering On the Projector:
1.
Remove the projector lens cap.
2.
Complete the AC power cord and peripheral signal cable(s) connections.
3.
Press
to turn on the projector.
The projector takes a minute or so to warm up.
4.
Turn on your source (computer, notebook, DVD, etc.). The projector automatically
detects your source.
If you are connecting multiple sources to the projector simultaneously, press
SOURCE on the projector to select your desired signal or press your desired
signal key on the remote control.
Warning
Remove the lens cap first before powering on.
Never look into the lens when the lamp is on. This can damage your eyes.
This focal point concentrates high temperature. Do not place any object near
it to avoid possible fire hazard.
Powering Off the Projector:
1.
Press
to turn off the projector lamp. You will see a message "Power off"
appear on the screen.
2.
Press
again to confirm.
When the Power LED begins flashing, the projector has entered stand-by
mode.
3.
Disconnect the AC power cord from the electrical outlet and the projector.
4.
Do not turn on the projector right after power off
ViewSonic Pro8450w
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents