Operation; Turning The Projector On/Off; Starting Up The Projector; First Time Activation - ViewSonic LS610WHE User Manual

Operation

Turning the Projector ON/OFF

Starting Up the Projector

1. Press the Power button to turn on the projector.
2. The light source will light up, and a "Power On/Off Ring Tone" will play.
3. The Power Indicator Light stays green when the projector is On.
NOTE:
To maintain light source life, once you turn the projector On, wait at least five
(5) minutes before turning it off.
4. Turn on all of the connected equipment, i.e. notebook, and the projector will
start to search for an input source.
NOTE:
If the projector detects an input source, the source information will appear. If
an input source is not detected, the message, 'No Signal' will appear.

First Time Activation

If the projector is activated for the first time, select your OSD language following
the on-screen instructions.
22