ViewSonic Wireless Media Gateway WMG80 User Manual page 72

2 My Wireless Media Gateway Access Point
will not turn on. No LED's light up.
• The power is not connected.
• Connect the power adapter to your AP and plug it into
the power outlet.
IMPORTANT! Only use the power adapter that came
with your Wireless Media Gateway. Using any other
adapter may damage your Wireless Media Gateway.
3 LAN Connection Problems I can't access my
Gateway.
• Make sure your Gateway is powered on.
• Check network connections.
• The computer you are using does not have a
compatible IP Address. Be sure that the IP Address
used on your computer is set to the same subnet as the
. For example, if the
Gateway
192.168.1.1, change the IP address of your computer to
192.168.1.15 or another unique IP Address that
corresponds to the 192.168.1.X subnet.
• Press Reset on the back of the Gateway to revert to the
default settings.
ViewSonic Wireless Media Gateway
Gateway
is set to
Gateway
66