Preparation Before Installation; Packing List; Tools Needed For Installation - TdA FBD120 Installation And User Manual

FBD120/180/200/220 SECTIONAL GARAGE DOOR OPENER

4. Preparation before Installation

 After receiving the product, you should make an unpack-inspection, in which
you should check whether the product was damaged. If you have any problem
please contact dealer.
 Packing list:
Door opener (x1)
Operator bracket (x3)
Straight arm(x1)
Screw(M8x16mm) Screw cap (M8)


Tools Needed for installation

Chain drive rail assembly (x1)
Header bracket (x1)
Angle iron (x1)
Screw cap(M6) Screw(M6x22mm) Screw(M6x55mm)
Screw/Screw cap/Pin and R pin
1 Electric drill and assorted drill bits
2
Spanner / Wrench
3
4 Tape Measure and Level Ruler
Slotted Screwdriver and Philips Screwdriver
5
6
7 Multimeter / Test pen
8
9
Door bracket(x1)
7 shaped angle iron (x2)
Fig.1
A ladder
Pliers
Hacksaw / Cutter
Hammer
5
Shuttle &manual release cord(x1)
L arm (x1)
Transmitter (x2)
R pin
Pin Pin (long)