Door Lock Mode - TdA FBD120 Installation And User Manual

FBD120/180/200/220 SECTIONAL GARAGE DOOR OPENER
SET
SET
SET

Door Lock Mode

1. Press and hold "SET" for 4 seconds until 'P1' is displayed.
2. Press "UP" button for four times until 'P5' is indicated on the LED display. And
press the "SET" button.
3. Press "UP" to enable the door lock ('LC' will be displayed). Press "DOWN" to
disable the door lock ('UL' will be displayed).
4. Press SET to confirm the setting.
DOOR LOCK function is available only when the door is in fully closed
position.
Once the DOOR LOCK function is set, the transmitter will also be locked. To
operate the garage door, you need to unlock the transmitter first by
pressing the button 4 of the transmitter.
Light function
If you cancel the door lock mode, press button 4 twice, the light will turn on,
press the button 4 once, the light will turn off.
LEARN
UP DOWN
1
LEARN
UP DOWN
3
UP LEARN
DOWN
(Fig.17, Fig 18)
SET
SET
Increase time
Fig.16
15
UP LEARN
DOWN
2
Decrease time
UP LEARN
DOWN
4