Adjusting Obstruction Force Sensitivity - TdA FBD120 Installation And User Manual

FBD120/180/200/220 SECTIONAL GARAGE DOOR OPENER
SET
SET
SET
The door will do a complete
open and close cycle.

Adjusting Obstruction Force Sensitivity

If the door meets an obstruction during closing, it will stop and reverse about
15cm~20cm.
1. Press and hold "SET" button for 4 seconds until 'P1' is displayed on LED.
2. Press "UP" button, 'P2' will be displayed.
3. Press the "SET" button, the opener is now in force adjustment mode.
4. Press "UP" button to increase force setting, maximum force setting is level 9 (F9).
Press "DOWN" button to decrease force, minimum force setting is level 1(F1).
5. Press "SET" button to confirm the setting.
LEARN
UP DOWN
1
UP DOWN LEARN
3
UP LEARN
DOWN
5
7
SET
SET
SET
SET
Fig.13
(Fig.14)
12
UP LEARN
DOWN
2
UP LEARN
DOWN
4
UP LEARN
DOWN
6
LEARN
UP DOWN