Programming; Open And Close Limit - TdA FBD120 Installation And User Manual

FBD120/180/200/220 SECTIONAL GARAGE DOOR OPENER

7. Programming

Once the opener is connected to power, the number "88" will be displayed on the LED.
And ' . ' indicates the opener is now on normal status.
SET

Open and Close Limit

1. Press and hold "SET" button for 4 seconds until 'P1' is displayed.
2. Press "SET" again, 'OP' will be displayed.
3. To set open limit, Press and hold "UP" button, 'OP' on the LED display will be flashing,
release the button until the door has reached desired position.
4. Press "SET" to confirm the open limit position. the LED will now indicated the 'CL'
5. To set close limit, press and hold "DOWN" button, 'CL' will be flashing, release the button
until the door has reached desired position.
6. Press SET to confirm the close limit position.
7. Limit setting complete.
LEARN
UP
DOWN
(Fig.13)
SET
Fig.12
11
UP LEARN
DOWN