Projector Connections
Pen/Touch Settings
Setting Item
Projector on the left
(connected to the
computer)
Installation of Projectors >
Wired
Sync of Projectors
If you are using the projector in the same room as another projector
a
that does not support cable connection, set the Infrared Intensity
setting to Strong.
Signal I/O Settings
Setting Item
Projector on the left
(connected to the
computer)
EDID
3240×1080/60Hz
For Use without Interactive Features
See the following tables for more details on menu settings when you connect
multiple projectors to create a horizontally wide screen without the interactive
B
Projectors on the right
Wired
B
Projectors on the right
3240×1080/60Hz
feature. When you do not use the interactive features, you can connect up to
four projectors in a chain.
Multi-Projection Settings
Setting Item
Projector on the left
(connected to the
computer)
HDMI Out Setting
Pass Through
Number of
Specifies the number of projectors connected in a chain.
Projectors
Order
Specifies the position of this projector in number order from
left to right
B
C
Projectors in the
Projector on the
middle
right
Pass Through
Pass Through
44