Table of Contents
Advertisement
Projector Feature Settings - Operation Menu
Setting
Options
Standby Mode
Communication
On
Communication
Off
Port
Wired LAN
Wireless LAN
Quick Startup
Off
20min.
60min.
90min.
Indicators
On
Off
Inv Direction
On
Button
Off
Reset Operation
—
Settings
g g Related Links
• "Adjusting the Brightness"
p.83
Description
Set to On to allow monitoring and
controlling the projector over a network
when the projector is in standby mode.
Setting is only displayed when A/V
Output is set to While Projecting.
Sets the port to use while the Standby
Mode setting is set to Communication
On.
Sets the time period for Quick Startup
mode. The projector enters this mode
when you turn it off. You can start
projecting in approximately five seconds
by pressing the power button.
(Set A/V Output to While Projecting
first.)
However, it may take longer to become
ready for use in the following situations:
• When projecting from the projector's
USB port
• When projecting from the projector's
HDMI Out port
• When projecting using the Screen
Mirroring features
• If whiteboard sharing was terminated
in the previous session
• If you want to restore the whiteboard
contents from the previous session
Set to Off to turn off the indicator lights
on the projector.
Set to On to invert the control panel
arrow button direction to match the
projector installation position.
Resets all adjustment values on the
Operation menu to their default settings.
214
Advertisement
Table of Contents
