Table of Contents
Advertisement
Wireless Network Projection
Using a USB Key to Connect a Windows Computer
You can set up your USB flash drive as a USB key to quickly connect the
projector to a wireless LAN supported Windows computer. After creating the
USB key, you can quickly project images from the network projector.
a
Set up the USB key using USB Key Setup Tool of the Epson iProjection
(Windows/Mac) software.
See the Epson iProjection Operation Guide (Windows/Mac) for
a
instructions.
b
Make sure the wireless LAN module is installed or built into your
projector.
c
Turn on the projector.
d
Press the [LAN] button on the remote control.
You see the network information screen. Verify that an SSID and IP
address are displayed.
e
Connect the USB key to the projector's USB-A1 port.
You see a projected message that the network information update is
complete.
f
Remove the USB key.
g
Connect the USB key to a USB port on your computer.
h
Follow the on-screen instructions to install the necessary application.
• If the Windows Firewall message is displayed, click Yes to
a
disable the firewall.
• You need administrator authority to install the software.
• If it is not installed automatically, double-click
MPPLaunch.exe in the USB key.
After a few minutes, your computer image is displayed by the projector.
i
When you have finished projecting wirelessly, select the Safely Remove
Hardware option in the Windows taskbar, and then remove the USB
key from your computer.
You may need to restart your computer to reactivate your
a
wireless LAN connection.
g g Related Links
• "Getting the Latest Version of the Documents"
171
p.10
Advertisement
Table of Contents
