Table of Contents
Advertisement
Projector Installation Settings - Installation Menu
Setting
Options
Image Shift
Various positions
available
Connect ELPCB02
On
Off
Touch Unit
—
Remote Receiver
Front/Rear
Front
Rear
Off
Projector ID (EB-
—
1480Fi only)
Screen Type
4:3
16:6
16:9
16:10
21:9
Screen Position
Various positions
available
High Altitude
On
Mode
Off
Reset Installation
—
Settings
Description
Shifts the image position horizontally
and vertically.
This feature is not available if the Digital
Zoom option is set to the widest setting.
Set to On to switch the input source
between HDMI2 and HDMI3 each time
you press the [HDMI2] button on the
optional interface box (ELPCB02).
See the Pen/Touch menu table for details
on the Touch Unit settings.
Limits reception of remote control
signals by the selected receiver; Off turns
off all receivers.
See the Multi-Projection menu table for
details on the Projector ID settings.
Sets the aspect ratio of the screen to fit
the image into the projection area.
16:6 is available with EB-1485Fi only.
Shifts the image position horizontally
and vertically.
This feature is not available if you set the
Screen Type setting to the same aspect
ratio as the projector resolution.
Regulates the projector's operating
temperature at altitudes above 1500 m.
Resets all adjustment values on the
Installation menu to their default
settings, except for the following:
• Digital Zoom
• Image Shift
g g Related Links
• "Projection Modes"
p.55
• "Image Shape"
p.61
• "Projector Setup and Installation Options"
• "Multiple Projector Operation Settings - Multi-Projection Menu"
• "Projector Pen And Touch Setup Settings - Pen/Touch Menu"
• "Resizing the Image with the Buttons"
210
p.28
p.233
p.227
p.70
Advertisement
Table of Contents
