Table of Contents
Advertisement
3. Enter the phone number, or press the left ar-
row key to enter a name you want to send to
and press
.
YES
The display now looks like this:
Mm Sent!
If your message does not go through, it will be
sent back to you.
Setting Duration of Message
1. Select Options in the Send menu.
2. Select Valid Per.
3. Select how long you want the message to be
repeated.
The service center repeats the message for
the set duration or until the receiver can re-
ceive it.
About Other
Message Types
You can send SMS from your phone to the serv-
ice center and the service center can change the
message into the following types (if supported):
E-Mail
The E-mail address cannot contain more than
20 characters.
Telex
Fax
Both group 3 and 4.
EN/LZT 126 1344 R1A
X400
Voice
Changing Message Type
1. Select Options in the Send menu.
2. Select Msg Type.
3. Select the message type you want.
Receiving a Message
When you receive a message the display looks
like this:
At the same time you will hear a beep as loud as
the ring signal and the green light on top of the
phone will flash.
Reading an
Incoming Message
1. Press
when you have received a message.
YES
The display will show you the date of the in-
coming SMS, you can see the time by
*
pressing
.
2. Press
.
YES
The display will show you from which phone
number the message is sent, or the name if
stored in your phone book. The display could
now look like this:
Jenny
R
The arrow shows you that you can start scroll-
ing through the message with the right arrow
key.
3. Press the right arrow key to read the message.
When you have read a message, you can do one
of the following:
Call a phone number in the message by press-
ing
.
YES
Erase the message by pressing
erase prompt.
Store the message by pressing
prompt (you may get a reply prompt if the
sender has required a reply). Press
Store prompt and the message is stored on the
SIM Card.
Erasing a Message
Press
any time during the message and
CLR
answer
on the question prompt.
YES
Reading an
Old Message
1. Select the Read menu.
2. Scroll to the message you want to read and
press
.
YES
3. Read through the message by pressing the
right arrow key.
at the
YES
at the erase
NO
at the
YES
23
Advertisement
Table of Contents
