Table of Contents
Advertisement
Customizing Your Reduced Menu
This chapter describes how you can customize your reduced menu structure by adding or de-
leting different menus and sub-menus.
About Customizing
Menus
The reduced menu system can be customized by
adding or deleting other menus or sub-menus.
You cannot delete the standby display and
Menu Size from the reduced menu system.
When you are scrolling through the menus in
customize mode, the menu names will be either
blinking or solid meaning that you may either
add or delete (respectively) the menu from the
reduced system.
When you add a menu to the reduced menu sys-
tem and accept the position the phone suggests,
the menu will be placed in the third position to
the right of the standby display. See the separate
leaflet for a description of how the reduced
menu system would look like if the Settings
menu had been added.
Adding Menus
1. Select Edit Menus in the Customize menu.
2. Scroll to and select menu or sub-menu that
you want to add (a menu where the name is
blinking).
EN/LZT 126 1344 R1A
3. Press and hold
for three seconds.
YES
4. Press
to accept the position (if you wish
YES
to change the position, see section below).
5. Repeat steps 2 and 3 to add more menus.
6. Press
or
.
NO
CLR
7. Press
to update.
YES
Note!
You can select sub-menus from the Settings
and the Locks menus.
Changing Menu
Position
Press
when the AcceptPos? prompt ap-
NO
pears. The display could now look like this:
Store>04?
This display means that the menu that you want
to add will be in the fourth (04) position to the
right (>) in the reduced menu system.
See the table below on how to use the keys to
change the position on the menu.
Press this: To:
*
toggle between left and right position.
enter a position number (you cannot
1–9
have a menu on position 00).
accept position.
YES
reject a position or return to edit
NO
mode.
get back the suggested position.
CLR
Deleting Menus
1. Select Edit Menus in the Customize menu.
2. Scroll to the menu you want to delete (a menu
where the name is not blinking).
3. Press
for three seconds.
YES
The menu name is now blinking meaning that
it is now taken away from the reduced menu
system.
4. Repeat steps 2 and 3 to delete more menus.
5. Press
or
.
NO
CLR
6. Press
to update.
YES
21
Advertisement
Table of Contents
