Jensen CMR270 Installation & Owner's Manual page 5

Note:
When replacing a fuse, make sure to use the correct type and amperage. Using an incorrect fuse could cause
damage. The unit uses (1) 10 amp ATC mini style fuse located on the power connector.
Wiring Notes:
Rear camera input
A rear view camera (not included) can be used with the Camera input.
GRAY
GRAY/BLACK
VIOLET
VIOLET/BLACK
CMR270
Wiring Diagram - Inputs/Outputs
GREEN/WHITE REVERSE
BLUE AMP/ANT(+)
ORANGE
TFT DIMMER (+)
ACC 12V (+)
INSTALLATION
4 4