Advertisement
You will need 2 person(s) for this assembly. You will need a Phillips head screw driver.
STEP 17A : Attach Return Transaction Top(W) by inserting existing Screw Bolts on Modesty into Screw Bolt Locks on underside of top(W).
Tighten Screw Bolt Locks(Figure 2).
LEFT RETURN
STEP 17B : Secure Return Transaction Top(W) to Desk Transaction Top(V) using 1 Flat Brackets(I) and 4 Small Bolts(F).
STEP 18A : Begin by removing all drawers from Pedestals.
For Suspension A
Find the black tabs at the end of the suspension. Lift one side up
and press the other side down simultaneously and pull the drawer
out.
Suspension A
STEP 18B :
Suspension B
Find the black tabs at the end of the suspension. Press in on each
tab and lift drawer up and out.
Suspension B
Any problems or questions call Regency Office Furniture at 1-866-816-9822
TVRD7236 • INSTRUCTIONS
W
W
W
V
STEP 19A : Insert 4 Glides(D) into bottom of each pedestal.
Attach Box/Box/File Ped(R) using 4 Long Bolts & Washers(E).
E
E
STEP 19B : Repeat Step 19A for the File/File Ped(S).
Replace all Drawers.
NOTE: PEDESTAL ORIENTATION IS INTERCHANGEABLE.
RIGHT RETURN
E
E
Advertisement
