A2) Rhebsl & Rhebxl Trims - Irving IRHEDV32 Installation Instructions & Homeowner's Manual

TRIM ASSEMBLY
RHEBSL
1. Install trim channels (left and right sides). Use two
screws to assemble each piece.
2. Slide on the trim top channel and fasten it from the
back side.
3. Install the trim top deflector and use two screws to
fasten it. (Fig. 26)
4. Remove ALL plastic protective covering from brass trim.
Trim Top Deflector
ALL repair parts will be available from your local dealer.
When ordering, always give the following information: Model and serial number, part description with finish and part number;
KEY DESCRIPTION
1 Trim Frame Flat Black
2 Trim Top Deflector
3 Trim Top Channel
4 Trim Side Channel
5 Trim Outer Top Channel
6 Trim Outer Side Channel
7 Fasteners Package (Not Shown)
(1) RHEBXLP or RHEBXLA to be used with RHEBSLP or RHEBSLA trims.
(2) SL trim dimensions are for openings smaller than 27
(4)
XL trim dimensions are for openings smaller than 30"H x 45
10003929
A2) RHEBSL & RHEBXL TRIMS
Trim Frame Top Section
Side View
TRIM REPLACEMENT PARTS LIST
4
6
RHEBXL
To install the kit you do not have to remove any piece
of brass, you just add the external pieces.
Remove the frame trim from the unit if it is already
installed.
1. Install trim channels (left and right sides)by removing
the two screws that hold the side brass trim and put
them back to hold both parts.
2. Slide on the trim top channel and fasten it from the
back side.
3. Remove the two screws that hold the top brass trim.
4. Install the two brackets to the studs in the bottom of
the top channel. Use the nuts supplied with the kit.
5. Reinstall the two screws to hold the top trim channel.
Fig. 26
RHEBSLP
57926
17634-PB
57864
57862
-
-
54618
1/2 "H x 40 1/2 " W (700mm x 1030mm)
5/8
" W (765mm x 1160mm)
5
3
1
2
(1)
RHEBSLA RHEBXLP
57926 -
17634-AB -
57844 -
57843 -
- 57861
- 57863
54618 57633
4
6
(1)
RHEBXLA
-
-
-
-
57845
57846
57633
20