Irving IRHEDV32 Installation Instructions & Homeowner's Manual page 18

FRAME MOUNTING
GENERAL INFORMATION
The Decorative Front Frame should be installed last
after all other work, such as gas connections, venting,
etc., has been completed and thoroughly checked and
tested for operation, leaks and proper installations
requirements.
Fit Decorative Frame to the fireplace and fasten (Fig. 25).
AS SHOWN FROM FRONT
Plastic on the trim must be removed
before mounting onto the fireplace.
Glass must be tightly pressed against the
front of the frame in order to prevent
screws from damaging glass edges.
10003929
SCREWS
Fig. 25
18