JVC KD-SR83BT Instruction Manual page 21

BLUETOOTH®
Settings to use JVC Remote application
JVC Remote application is designed to control the JVC car receiver's operations from
the iPhone/iPod (via Bluetooth or via USB input terminal) or Android smartphone (via
Bluetooth).
Preparation:
Install the latest version of JVC Remote application on your device before connecting.
For more information, visit <http://www.jvc.net/cs/car/>.
1
Press and hold .
2
Turn the volume knob to select an item (see the following table), then press the
knob.
3 2
Repeat step until the desired item is selected or activated.
4
Press to exit.
To return to the previous setting item, press
REMOTE APP
SELECT Select the device (IOS or ANDROID) to use the application.
IOS YES: Selects iPhone/iPod to use the application via Bluetooth or connected via USB input
terminal. ; NO: Cancels.
If IOS is selected, select iPod BT source (or iPod USB if your iPhone/iPod is connected via USB input
terminal) to activate the application.
• The connectivity of the application will be interrupted or disconnected if:
– You change from iPod BT source to any playback source connected via the USB input terminal.
– You change from iPod USB source to iPod BT source.
ANDROID YES: Selects Android smartphone to use the application via Bluetooth. ; NO: Cancels.
ANDROID LIST * : Selects the Android smartphone to use from the list.
* Displayed only when [ANDROID] of [SELECT] is set to [YES].
.
Default: XX
STATUS Shows the status of the selected device.
IOS CONNECTED: You are able to use the application using
the iPhone/iPod connected via Bluetooth or USB input
terminal.
IOS NOT CONNECTED: No IOS device is connected to use
the application.
ANDROID CONNECTED: You are able to use the
application using the Android smartphone connected via
Bluetooth.
ANDROID NOT CONNECTED: No Android device is
connected to use the application.
Listen to iPhone/iPod via Bluetooth
You can listen to the songs on the iPhone/iPod via
Bluetooth on this unit.
Press repeatedly to select iPod BT.
• You can operate the iPod/iPhone in the same way as
iPod/iPhone via USB input terminal. ( 7)
• If you plug in an iPhone/iPod to the USB input
terminal while listening to iPod BT source, the source
automatically change to iPod USB. Press
to select iPod BT if the device is still connected via
Bluetooth.
17
ENGLISH