Verizon GT704WGB User Manual page 97

9
Troubleshooting
9.1 Troubleshooting
5. If the Ethernet adapter is showing an incorrect IP address, click
which sets all values back to zero. Then, click Renew (this process
may take a few seconds). The renewed IP address should be on the
192.168.1.x network.
6.
If an error occurs, or the IP address renews with an address outside the
192.168.1.x network, contact the ISP immediately.
If running Windows 2000 or XP, check the computer's TCP/IP settings by
doing the following:
1.
Select
2. Press
3. Enter "
The IP address of the Ethernet adapter should appear in the DOS
window. Ensure the IP address is in the 192.168.1.x network (with
"x" defining a range from 2 though 255).
4. If the Ethernet adapter is showing an incorrect IP address, enter
"ipconfig /release"at the cursor, then press Enter on the keyboard. This
sets all values back to 0 (zero).
5. Enter "ipconfig /renew" at the cursor, then press
(this process may take a few seconds). The renewed IP address should
be on the 192.168.1.x network. If an error occurs, or the IP address
renews with an address outside the 192.168.1.x network, contact the
ISP immediately.
Ensure the browser is not set to "Never dial a connection" and there are no
previous LAN settings. To check this:
1. Go to
2.
In the Control Panel, double-click
3. When the "Internet Properties" window appears, ensure that the "Never
dial a connection" option is not activated, then click LAN Settings.
4.
When the "Local Area Network (LAN) Settings" window appears, ensure
that no settings are activated. If there are settings activated, deactivate
them.
© 2008 Verizon. All Rights Reserved.
Start, Run, then enter "CMD"in the "Open" text box.
OK. A "DOS" window appears, with a blinking cursor (prompt).
ipconfig"at the cursor, then press Enter on the keyboard.
Start, Settings, Control Panel.
Enter on the keyboard
Internet Options.
96
Release,