Verizon GT704WGB User Manual page 53

5
Advanced Settings
5.5 WAN IP Address
The "WAN IP Address" screen appears.
WAN IP Address allows manual set up of the IP address of the Gateway. To do
this:
Note: Some DSL providers use PPPoE to establish communication with an
end user. Other types of broadband Internet connections (such as fixed point
wireless) may use either DHCP or static IP address. If unsure which connection is
present, check with Verizon before continuing.
1. Select "DHCP" or "PPPoE," depending on the type of connection the ISP uses.
If PPP Auto Connect is being used, click in the appropriate check box.
2. If using PPPoE was selected in step 1, enter the user name and password in
the appropriate text boxes.
3. Select the IP type. If "Single Static IP Address" was selected, enter the IP
address in the "Single Static IP" text box. If "Multiple Static IP Addresses" was
selected, enter the designated gateway IP address and subnet mask address
in the "Gateway Address" and "Subnet Mask" text boxes, respectively.
© 2008 Verizon. All Rights Reserved.
52