Safety Information - Fluke 701 User Manual

701/702
Users Manual

Safety Information

wThis calibrator is designed and tested in
accordance with IEC1010-1 and CAN/CSA C22.2
No. 1010.1-92. Use the calibrator only as specified in
this manual or in the Quick Reference Guide;
otherwise the protection provided by the calibrator
may be impaired.
AC-Alternating Current
DC-Direct Current
Fuse
Pressure
Recycling
10
A WARNING identifies conditions and actions that
pose hazards to the user; a CAUTION identifies
conditions and actions that may damage the
calibrator or the equipment under test.
Symbols used on the calibrator and in this manual
are explained in Figure 3.
CAUTION see explanation in manual
Common (LO) Input equipotentiality
ON/OFF
Equipment protected throughout by DOUBLE INSULATION or
REINFORCED INSULATION
Overvoltage (Installation) Category
of Impluse Withstand Voltage protection provided. Typical locations
II
CAT
include; Mains Wall outlets, local appliances and PORTABLE
EQUIPMENT.
Figure 3. Definition of Symbols
II
per IEC 1010-1 refers to the level