Toro PowerPlex 40V MAX Operator's Manual page 8

Adjusting the Air Speed of
the Blower
To accelerate the blower speed, press and hold the
turbo boost button for the desired amount of time
(Figure 5).
To adjust the air speed as you blow, use the
variable-speed trigger
To maintain the current air speed, engage the speed
lock (Figure 5).
Shutting Off the Blower
To shut off the blower, disengage the speed lock (if in
use) and release the variable-speed trigger
Important:
After stopping the blower, do not
leave the speed lock engaged with the battery
pack in the blower.
Whenever you are not using the blower or are
transporting the blower to or from the work area,
remove the battery pack.
Removing the Blower Tube
Press down on the tab to separate the blower tube
from the blower (Figure
1. Tab
(Figure 5).
(Figure
6).
Figure 6
Removing the Battery from
the Blower
Press down on the battery latch to separate the
battery from the blower
5).
1. Battery latch
Using the Attachments
Use the provided attachments as needed.
Note:
The Gutter Cleaner Kit (Model 51667) and
Oscillating Tube (Model 51664) are sold separately.
g228499
1. Gutter cleaner adaptor
2. Blower tube
8
(Figure 7).
Figure 7
Figure 8
3. Oscillator/MPH insert
adapter
4. MPH insert
g194150
g194438