External Video Component; Rear Display - Pioneer DMH-ZS9350BT Quick Start Manual

View camera (sold separately)
NOTES
• Connect only the rear view camera to
brown cable. Do not connect any other
equipment.
• Some appropriate settings are required
to use rear view cameras. For details, refer
to the Operation Manual.
External video
component
Using an AUX input
This product
Pre out supply
To pre out supply
Pre out cord
AUX input (AUX IN) 15 cm
Mini-jack AV cable (sold separately)
Yellow
Red, white
RCA cables (sold separately)
To video output
To audio output
External video component (sold
separately)
NOTE
The appropriate setting is required to use
the external video component. For details,
refer to the Operation Manual.
CAUTION
Be sure to use a mini-jack AV cable (sold
separately) for wiring. If you use other
cables, the wiring position might differ
resulting in disturbed images and sounds.
L : Left audio (White)
R : Right audio (Red)
V : Video (Yellow)
G : Earth
Using an HDMI input
This product
Micro HDMI port
Micro HDMI to HDMI cable (sold
separately)
HDMI device (sold separately)

Rear display

This product
Pre out supply
To pre out supply
Pre out cord
Yellow (REAR MONITOR OUTPUT) 30
cm
RCA cable (sold separately)
To Video input
Rear display with RCA input (sold
separately)
WARNING
NEVER install the rear display in a location
that enables the driver to watch the video
source while driving.
This product's rear video output is for
connection of a display to enable
En
11