Table of Contents
Related Manuals for Pioneer DMH-1770NEX
Summary of Contents for Pioneer DMH-1770NEX
- Page 1 DMH-1770NEX DMH-1700NEX RDS AV RECEIVER Operation Manual Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card.
- Page 2 Contents Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference.
- Page 3 ■ Other functions................. 48 ■ Appendix ................... 49 - 3 -...
- Page 4 • If you notice smoke, a strange noise or odor from this product, or any other abnormal signs on the LCD screen, turn off the power immediately and consult your dealer or the nearest authorized Pioneer Service Station. Using this product in this condition may result in permanent damage to the system.
- Page 5 If your vehicle has a compliant backup camera that displays the backup view through the factory receiver, do not use the Pioneer receiver unless it is connected to and displays the same view as the factory backup camera. Connection to the factory backup camera will require an adaptor, sold separately.
- Page 6 • Do not take any steps to tamper with or disable the parking brake interlock system which is in place for your protection. Tampering with or disabling the parking brake interlock system could result in serious injury or death. • To avoid the risk of damage and injury and the potential violation of applicable laws, this product is not for use with a video image that is visible to the driver.
- Page 7 • To prevent data loss and damage to the storage device, never remove it from this product while data is being transferred. • Pioneer cannot guarantee compatibility with all USB mass storage devices and assumes no responsibility for any loss of data on media players, iPhone, smartphone, or other devices while using this product.
- Page 8 • When using a cellular phone, keep the antenna of the cellular phone away from the LCD screen to prevent disruption of the video in the form of spots, colored stripes, etc. • To protect the LCD screen from damage, be sure to touch the touch panel keys only with your finger and do so gently.
- Page 9 Parts and controls Main unit Touch to turn off the display information. To turn on the display information, touch again. Touch and hold to power off. To power back on, touch again. If you power the unit off, you can turn off almost all functions. The unit turns on by operating the following functions: •...
- Page 10 Volume (+/-) MODE Not used. Press to cycle through all the available sources. Press and hold to turn the power off. TOP MENU Not used. MENU Not used. Thumb pad Not used. MUTE AUDIO Not used. SUBTITLE ANGLE BAND/ESC Press to select the tuner band when tuner is selected as a source. RETURN Not used.
- Page 11 Basic operation Resetting the microprocessor CAUTION • Pressing the RESET button resets settings and recorded contents to the factory settings. – Do not perform this operation when a device is connected to this product. – Some of the settings and recorded contents will not be reset. •...
- Page 12 CAUTION • Remove the battery if the remote control is not used for a month or longer. • There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. • Do not expose a battery to high or low extreme temperatures during use, storage or transportation. •...
- Page 13 Operating list screens Touching an item on the list allows you to narrow down the options and proceed to the next operation. Appears when items cannot be displayed on a single page. Drag the side bar, the initial search bar or the list to view any hidden items. Operating the time bar You can change the playback point by dragging the key.
- Page 14 Top menu screen Source icons You can display the hidden source icon(s) by swiping left on the screen. Setting the time and date (page 48) Settings (page 41) - 14 -...
- Page 15 Bluetooth® Bluetooth connection Turn on the Bluetooth function on the device. Touch Touch then [Bluetooth Settings]. The Bluetooth screen appears. Touch [Search]. The unit starts to search for available devices, then displays them in the device list. To search for available devices again, touch Touch the Bluetooth device name.
- Page 16 Menu Item Description [Bluetooth Memory Clear] Touch [OK] to clear the Bluetooth memory. [Bluetooth Paired Device Display the paired device list. List] Touch to delete registered device. [Bluetooth Device Info] Displaying the device name of this product. Hands-free phoning To use this function you need to connect your cellular phone to this product via Bluetooth in advance (page 15).
- Page 17 Receiving a phone call Touch to answer the call. Touch to end the call. TIPS • Touch while getting a call waiting, switch to the talking person. • Touch while getting a call waiting to reject the call. Voice recognition function (for iPhone) By connecting your iPhone to this product, you can use the voice recognition function on this product.
- Page 18 ▶Registration and connection • Cellular phone operations vary depending on the type of cellular phone. Refer to the instruction manual that came with your cellular phone for detailed instructions. • When phone book transfer does not work, disconnect your phone and then perform pairing again from your phone to this product.
- Page 19 • While you are listening to songs on your Bluetooth device, refrain from operating the phone function as much as possible. If you try operating, the signal may cause noise for song playback. • When you are talking on the Bluetooth device connected to this product via Bluetooth, it may pause playback.
- Page 20 AV source Supported AV source You can play or use the following sources with this product. • Radio • USB The following sources can be played back or used by connecting an auxiliary device. • iPhone • Bluetooth® audio • SiriusXM® Satellite Radio •...
- Page 21 Radio Starting procedure Press Touch [Radio]. The Radio screen appears. Basic operation Recalls the preset channel stored to a key from memory. XX.XX XX.XX Stores the current broadcast frequency to a key. Selects the FM1, FM2, FM3, AM1 or AM2 band. Performs BSM (best stations memory) function (page 22).
- Page 22 Activates/deactivates the local seek mode. Local Displays a preset channel for 10 seconds and switches to the next channel automatically. Storing the strongest broadcast frequencies (BSM) The BSM (best stations memory) function automatically stores the six strongest broadcast frequencies under the preset channel keys [1] to [6]. NOTES •...
- Page 23 Compressed files Plugging/unplugging a USB storage device You can play compressed audio, compressed video, or still image files stored in an external storage device. Plugging a USB storage device Pull out the plug from the USB port of the USB cable. Plug a USB storage device into the USB cable.
- Page 24 Plug the USB storage device into the USB cable (page 23). Touch [USB]. Playback is performed in order of folder numbers. Folders are skipped if they contain no playable files. Basic operation Audio source Switches between playback and pause. Skips files forward or backward. Performs fast forward or fast reverse.
- Page 25 Selects a file from the list. Touch a file on the list to playback. TIPS • Touching a folder on the list shows its contents. You can play a file on the list by touching it. • You can switch the following media file types. –...
- Page 26 Selects a file from the list. Touch a file on the list to playback. TIPS • Touching a folder on the list shows its contents. You can play a file on the list by touching it. • You can switch the following media file types. –...
- Page 27 Selects a file from the list. Touch a file on the list to playback. TIPS • Touching a folder on the list shows its contents. You can play a file on the list by touching it. • You can switch the following media file types. –...
- Page 28 iPhone NOTE iPhone may be referred to as iPod in this manual. Connecting your iPhone When connecting an iPhone to this product, the settings are automatically configured according to the device to be connected. For details of the compatibility, refer to Compatible iPhone models (page 58).
- Page 29 Skips files forward or backward. Performs fast forward or fast reverse. Sets a repeat play range for all in the selected list/the current song. Plays songs within the selected list/album randomly. Selects a song from the list. Touch the category then the title of the list to playback of the selected list. If you use English as the system language, the alphabet search function is available.
- Page 30 Using USB Mirroring Important • Pioneer is not responsible for content or functions accessed via USB Mirroring, which are the responsibility of the application and content providers. • Availability of non-Pioneer content and services, including apps and connectivity, may change or discontinue without notice.
- Page 31 Displays the main menu of the USB Mirroring source screen. For smartphone (Android™) users System requirement Android 5.0 or higher (up to Android 10) NOTES • [Android Phone MSC] is deactivated to enable use of this function (page 47). • The video playback capability depends on the connected Android device. Touch Touch then [Phone Connectivity Settings].
- Page 32 • Apple CarPlay allows access to applications other than those listed that are subject to limitations while driving. • PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE INFORMATION.
- Page 33 NOTES • For details on USB connection, refer to the Installation Manual. • If an Apple CarPlay compatible device has been connected and another screen is displayed, touch [Apple CarPlay] on the top menu screen to display the Application menu screen. •...
- Page 34 • Android Auto allows access to applications other than those listed that are subject to limitations while driving. • PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE INFORMATION.
- Page 35 You can use voice recognition function by touching button once Android Auto is activated. NOTES • For details on USB connection, refer to the Installation Manual. • When the device for Android Auto is connected to this unit, the device is also connected via Bluetooth at the same time.
- Page 36 SiriusXM® Satellite Radio Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy, and entertainment. Welcome to the world of satellite radio. A SiriusXM Connect Vehicle Tuner and Subscription are required.
- Page 37 Listening to SiriusXM Touch Touch [SiriusXM]. Basic operation [RADIO ID] is displayed when Channel 0 is selected. Current channel display (Live broadcast mode) Tunes a channel directly. Recalls the preset channel stored to a key from the memory. Pre1 Pre6 Stores the current channel to a key.
- Page 38 Selects a channel from the list. Scroll through the list of all channels then touch the desired channel to tune to that channel. When is selected, the channel list will be shown according to different categories. Touch to select other Category. NOTES •...
- Page 39 You can display the video image output by the device connected to video input. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake. NOTE A Mini-jack AV cable (sold separately) is required for connection.
- Page 40 Camera You can display the video image output by the device connected to video or camera input. For details, refer to the Installation Manual. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.
- Page 41 Settings You can adjust various settings in the main menu. Displaying the setting screen Touch Touch Touch one of the following categories, then select the options. System Settings (page 41) Display Settings (page 43) Audio & EQ Settings (page 43) Bluetooth Settings (page 15) Camera settings (page 44) Phone Connectivity Settings (page 47)
- Page 42 Menu Item Description [Factory Reset] Touch [OK] to restore the settings to the default settings. CAUTION Do not turn off the engine while restoring the settings. NOTES • This setting is available only when you stop your vehicle in a safe place and apply the parking brake.
- Page 43 Display Settings The menu items vary according to the source. Menu Item Description [Lighting Detect] Activate to set the dimmer function on automatically when the head lamps of the vehicle are lit. [Day Illumination] Touch [+]/[-] to adjust the brightness of the display in the day time.
- Page 44 Menu Item Description [Cutoff] [Subwoofer] Select enable or disable rear subwoofer output from this product. [Front HPF] Adjust the speaker output level of the listening position by touching [+]/[-]. [Rear HPF] [Subwoofer LPF] [EQ] Select or customize the equalizer curve. [Super Bass] [Powerful] Select a curve that you want to use as the basis of [Natural] [Vocal] [Flat]...
- Page 45 (page 45). CAUTION Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen image may appear reversed. • Immediately verify whether the display changes to the rear view camera image when the shift lever is moved to REVERSE (R) from another position.
- Page 46 Menu Item Description [Parking Assist Guide Adjusting the guidelines by dragging or touching Adjust] on the screen. Touch [OK] to finish the settings. Touch [Reset] to reset the settings. CAUTION • When adjusting the guidelines, park the vehicle in a safe place and apply the parking brake;...
- Page 47 Phone Connectivity Settings The settings are not available when the USB storage device is connected. Menu Item Description [Priority of Connectivity] Select the function that is prioritized when your [Android Auto] [Mirroring] smartphone (Android) is connected to the unit. [Android Phone MSC] Set the USB connection mode for your smartphone (Android) to MSC (Mass Storage Class).
- Page 48 Other functions Setting the time and date Touch the current time on the screen. Touch to set the correct time and date. You can operate the following items: Year, month, date, hour, minute. TIPS • You can change the time display format to [AM], [PM] or [24H]. •...
- Page 49 – Park your vehicle in a safe place, and authorized Pioneer service facility. then turn off the ignition switch (ACC OFF). Subsequently, turn the ignition Common problems switch to on (ACC ON) again.
- Page 50 If the error persists, record the error message and contact your – Perform the connection process. dealer or your nearest Pioneer service center. Problems with Application screen SiriusXM® Satellite Radio A black screen is displayed.
- Page 51 Pioneer www.siriusxm.ca or call 1-877-438- service center for assistance. 9677. No Signal Channel Locked Please Enter the Lock → The SiriusXM Connect Vehicle Tuner is Code → Locked by the radio Parental Control having difficulty receiving the SiriusXM satellite signal.
- Page 52 → Security for the connected USB storage instructions, please reconnect the device is enabled. device. – Follow the USB storage device No devices available Connect a Android instructions to disable security. phone with USB cable → The screen of the mobile device USB Mirroring connected to the unit is turned off.
- Page 53 – Turn off the ignition switch (ACC OFF) characteristics, file format, recorded and then turn the ignition switch to on application, playback environment, (ACC ON) again. storage conditions, and so on. – Power the unit off and then power it USB storage device compatibility on again.
- Page 54 USB storage device FLAC compatibility CODEC FORMAT MP3, WMA, SAMPLING FREQUENCY 8 kHz to 192 WAV, AAC, FLAC, AVI, QUANTIZATION BIT RATE 8 bit, 16 bit, 24 MPEG-PS, MP4, 3GP, MKV, MOV, ASF, FLV, USB storage device M4V, MPEG-TS EXTENSION .avi MP3 compatibility MAX RESOLUTION...
- Page 55 Bluetooth SIG, Compatible video codec VC-1 Inc. and any use of such marks by Pioneer Maximum resolution 1 920 × 1 080 Corporation is under license. Other trademarks Maximum frame rate...
- Page 56 contributors may be used to endorse or SiriusXM® Satellite promote products derived from this Radio software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE...
- Page 57 App Store is a service mark of Apple Inc., registered in the U.S. and other countries. • Pioneer accepts no responsibility for data lost from an iPhone, even if that data is lost while using this product. Please back up your iPhone data regularly.
- Page 58 Please note that product: the use of this product with iPhone or • Latest version of the Pioneer compatible iPod may affect wireless performance. connected content application(s) for the smartphone, available from the service...
- Page 59 When not using this product, avoid service by its provider. exposing it to direct sunlight as much as • Pioneer is not liable for any issues that possible. may arise from incorrect or flawed app- • The LCD screen should be used within based content.
- Page 60 Preout output level (max): 2.0 V visible. In that case, please consult your Equalizer (13-Band Graphic Equalizer): dealer or the nearest authorized Pioneer Frequency: Service Station. 50 Hz/80 Hz/125 Hz/200 Hz/315 Hz/ 500 Hz/800 Hz/1.25 kHz/2 kHz/3.15...
- Page 61 Speaker level: H.264 video decoding format: +10 dB to -24 dB (1 dB/step) Base Line Profile, Main Profile, High Profile H.263 video decoding format: USB standard spec: Base Line Profile 0/3 USB 1.1, USB 2.0 full speed, USB 2.0 high VC-1 video decoding format: speed Simple Profile, Main Profile, Advanced...
- Page 62 CTA2006 Specifications Power output: < = 14 W RMS × 4 Channels (4 Ω and THD+N) S/N ratio: 91 dBA (reference: 1 W into 4 Ω) NOTE Specifications and design are subject to possible modifications without notice due to improvements. - 62 -...
- Page 63 © 2021 PIONEER CORPORATION <OPM_DMH1700NEXUC_EN_A> UC...