Magnadyne Linear Series Installation Manual
Rv5090/rv5070 to rv6100/rv6200
Hide thumbs
Also See for Linear Series:
- User manual ,
- Operation & installation manual (16 pages) ,
- Operation and installation manual (29 pages)
Advertisement
Quick Links
Installation of RVWM-ADKIT
STEP 6
After the operation check is complete, use the (4)
screws that were removed from the old radio to secure
the radio into the wall plate adapter. DO NOT over
tighten the screws.
STEP 7
Remove the protective film on the face of the
radio (applies to RV6200 only) then snap the
radio trim ring or screw covers back onto the
radio face.
4
© Copyright 2019 Magnadyne Corporation
RVWM-ADPKIT-INS Rev. A 8-1-19
Installation Manual
RV5090 / RV5070 to RV6100 / RV6200
RV Wall Mount Replacement
Radio Mounting Adapter
Plate/Harness Kit.
Radio and radio components not included.
RVWM-ADPKIT
Advertisement
Related Manuals for Magnadyne Linear Series
Summary of Contents for Magnadyne Linear Series
- Page 1 Remove the protective film on the face of the radio (applies to RV6200 only) then snap the radio trim ring or screw covers back onto the radio face. Radio and radio components not included. © Copyright 2019 Magnadyne Corporation RVWM-ADPKIT-INS Rev. A 8-1-19...
- Page 2 Installation of RVWM-ADKIT Installation of RVWM-ADKIT STEP 3 Remove the plastic film from the Trim Ring black mounting adapter. Use the (4) black screws supplied and attach the adapter plate to the mounting surface. DO NOT over tighten these screws. Make sure to keep the existing wires routed through the radio hole in the adapter plate...