Selecting The Audio; Special Picture Playback - JVC TH-U1 Series Instructions Manual

Advanced operations

Selecting the audio

7During playback of a disc/file containing
audio in several languages
When using the AUDIO button:
1
Press AUDIO.
Example (DVD VIDEO): "ENGLISH" is selected out of
the 3 audio languages recorded.
2
Press AUDIO repeatedly or Cursor
Y/5 to select the desired audio.
When using the on-screen bar:
• For DivX, you cannot change the audio language using
the on-screen bar.
1
Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2
Press Cursor 3/2 to highlight
.
3
Press ENTER.
4
Press Cursor Y/5 to select the
desired audio.
5
Press ENTER.
6
Press ON SCREEN.
The on-screen bar disappears.
NOTE
• Some subtitle or audio languages are abbreviated in the pop-
up window. See "The language codes list". (See page 34.)
• "ST", "L", or "R" is displayed when playing a VCD
respectively representing "stereo", "left sound" and "right
sound".
When playing an SVCD, "ST1", "ST2", "L1", "R1", "L2", or
"R2" is displayed.
• While playing DVD VR/DivX, the audio stream is displayed
by its number like "1" or "2".
• While playing DVD VR having two audio streams of
multichannel and stereo, the indication changes like "1",
"ST2", "L2", or "R2".
27
See page 20 for button locations.

Special picture playback

Frame-by-frame playback
7During playback
Press 8 repeatedly.
Each time you press the button, the still
picture advances by one frame.
To return to normal playback
Press the play button for the corresponding source (DVD 3
or USB MEMORY 3).
Playing back in slow-motion
7During playback
1
Press 8 at the point
where you want to start playback
in slow-motion from.
The system pauses playback.
2
Press SLOW 9.
Playback in forward slow-motion starts.
Each time you press the button, the playback speed
becomes faster (1/32, 1/16, 1/8, 1/4, 1/2).
For DVD VIDEO only:
• To play back in reverse slow-motion, press SLOW (.
To return to normal playback
Press DVD 3.
NOTE
• Sound cannot be heard during slow-motion playback.
Zooming in
7During playback or while paused
1
Press ZOOM while
holding SHIFT.
Each time you repeat the procedure,
the scene magnification changes.
2
While zoomed in, press Cursor 3/
2/Y/5 to move zoom-in area.
To return to normal playback
Press ZOOM repeatedly while holding SHIFT, to select OFF.
NOTE
• The number of the magnification steps varies depending on
the disc/file.
• During slide-show playback of JPEG, zooming in is not
available. In such a case, press 8 to pause slide-show
playback, then zoom in.
• During playback, Cursor (3/2/Y/5) may not work in
step 2.