John Lewis Midcentury Sweep Bed Instructions Manual page 4

Step Three
Starting with the Headboard (1) attach the Side Rails (3) using the M8 x 45mm Bolt (G) and M8 Spring Washer (H)
into the pre-drilled holes on the Siderail (3). Please do not tighten the bolts yet.
Repeat the step with the Footboard (3). Do not tighten with M5 Allen Key (A) until you have inserted the Centre Rail
in the next step.
1 1
1
H.
G.
M8 Spring Washer
M8 X 45mm Bolt
x 8
x 8
Step Four
Lower the Centre Rail (6) into the pre-drilled holes of the Headboard (1) and Footboard (2) and attach with
M6 x 25mm Bolt (M) and fully tighten bolts with M4 Allen Key (L) as shown in Fig.3.
You can now tighten the bolts at the Side Rails from previous step (Step Two) with the M5 Allen Key (A) and
M13 Spanner (B) so all fastenings are now tightened.
6
Centre Rail
1
M5 Allen Key (L)
2
M5 Allen Key (L)
2
LOOSELY SECURE PARTS
TOGETHER IN ORDER FOR
CENTRE RAIL TO FIT IN
NEXT STEP
3
1
And
2
AFTER INSERTING CENTRE RAIL,
TIGHTEN ALL FIXINGS FULLY
INCLUDING BOLTS AT SIDE RAILS
3
(FROM STEP TWO)
3
3
2
M6 x 25(M)
1
And
2
6
M4(L)
3
6
2
B.
M13 Spanner
4/6
M8 x 45mm (G)
M8 x 45mm (G)
2
M8 Spring
Washer (H)
2
1
1 1
3
A.
M.
M6 x 25mm M5 Allen Key
x 1 x 2
Fig.1
M8 Spring
Washer (H)
x2
3
M8 Washer (E)
M8 Nut (F)
M13 Spanner (B)
L.
M4 Allen Key
x 1
x 1