Sanyo DS19500 Manual page 35

Notice
CORRECTION
SERVICE FLASH
Please add this notice to the Service Manual listed below.
COLOR TELEVISION
Category:
DS19500
Model:
U.S.A. / CANADA
Destination:
NOTE: Match the Chassis No. on the unit's back cover with the Chassis No. in the Service Manual.
If the Service Manual Chassis No. does not match the unit's, additional Service Literature is
required. This chassis is similar to Chassis No. 19500-00. Only the Difference Service
Information is given in this manual. For detailed Service Information, refer to the Original Service
Manual and Notices for Chassis No. 19500-00 used in Model DS19500 (SM5110088).
1. IN THE SERVICE ADJUSTMENTS LIST
PAGE 3
INITIAL BUS DATA SETUP
Note: When IC802 (EEPROM) is replaced, the Service Menu NO. 01 HP (H Phase), NO. 13 TDS (Trap & D SW), NO. 24 AG (AFC
Gain), NO. 26 SCO (Sub-Color), NO. 27 STI (Sub-Tint), NO. 28 SSH (Sub-Sharpness), NO. 29 OPT (Option 1), NO. 30 OP2
(Option 2),NO. 31 HR (OSD Display H-Position), NO. 60 R00 (ROM Data 0), NO. 61 R01 (ROM Data 1), NO. 64 R04 (ROM
Data 4), NO. 68 R08 (ROM Data 8), NO. 70 R10 (ROM Data 10), NO. 71 R11 (ROM Data 11), NO. 72 R12 (ROM Data 12),
NO. 73 R13 (ROM Data 13), NO. 74 R14 (ROM Data 14), NO. 75 R15 (ROM Data 15), NO. 76 R16 (ROM Data 16), NO. 77
R17 (ROM Data 17), NO. 78 R18 (ROM Data 18) and NO. 132 R72 (ROM Data 72) should be set up for proper TV opera-
tion before attempting the service adjustments.
1. Disconnect the AC power cord (AC 120V line).
2. While pressing the MENU key, reconnect the AC power cord. The Service Menu display will now appear.
3. Select NO. 01 HP (H Phase) with
4. Select NO. 13 TDS (Trap & D SW) with
5. Select NO. 24 AG (AFC Gain) with
6. Select NO. 26 SCO (Sub Color) with
7. Select NO. 27 STI (Sub Tint) with
8. Select NO. 28 SSH (Sub Sharpness) with
9. Select NO. 29 OPT (Option 1) with
10. Select NO. 30 OP2 (Option 2) with
11. Select NO. 31 HR (OSD Display H-Position) with
11a. Select NO. 60 R00 (ROM Data 0) to NO. 132 R72 (ROM Data 72) with
– key as specified in Table 1 in the following pages.
12. Press the MENU key to turn off the Service Menu display.
Note: The change in Initial Bus Data Setup above is also effective in Chassis No. 19500-00.
G8FFM, PRODUCT CODE 111350180
PRODUCTION CHANGE
ADD INFORMATION
SM5110088
REF: No.
or key. Adjust the data with + or – key for 18.
or key. Adjust the data with + or – key for 1.
or key. Adjust the data with + or – key for 0.
or key. Adjust the data with + or – key for 7.
or key. Adjust the data with + or – key for 19.
or key. Adjust the data with + or – key for 10.
or key. Adjust the data with + or – key for 100.
or key. Adjust the data with + or – key for 0.
or key. Adjust the data with + or – key for 30.
AS
FILE NO.
REVISION 3
JULY / 26 / 2001
Date:
Effective from: Chassis No.
or key and adjust each of the data with + or
REFERENCE No.
19500-03
SM
5110088-03