Installing The Chassis In A 2-Post Rack - Cisco ASR 9000 Series Installation Manual

Unpacking and Installing the Chassis

Installing the Chassis in a 2-Post Rack

Installing the Chassis in a 2-Post Rack
This section describes how to install the chassis in a 2-post telco-style rack. Two people can lift an empty
router chassis using the handles on the sides. To accommodate racks with different hole patterns in their
mounting flanges, the chassis rack-mounting flanges have three groups of eight oblong screw holes on each
side.
Caution An empty chassis weighs approximately 150 pounds (68 kg). You need two people to slide the chassis into
the equipment rack safely.
This figure shows the orientation of the Cisco ASR 9010 Router chassis to the rack posts (3" or 6" channel
width) of an industry-standard 2-post rack and components used in the installation.
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
104