Toro 136-5850 Installation Instructions page 2

Removing the Rear Wheel
1. Loosen and remove the nut from the axle bolt;
set the nut aside
1. Nut
2. Wheel
2. Remove the wheel assembly, spacer, and wheel
cover (Figure 3).
Important:
Retain the spacer for use
explained later in this procedure.
1. Wheel assembly
2. Spacer
3. Remove the bolt from the retainer and discard it
(Figure 4).
(Figure 2).
Figure 2
3. Axle bolt
Figure 3
3. Wheel cover
1. Bolt (5/16 x 3/4 inch)
2. Retainer
g187971
g234379
2
Figure 4
3. Height-of-cut lever
g187972