MSI 845 Pro Manual page 56

Chapter 3
Wake Up On Ring/LAN/PME
When setting to Enabled, these features allow your system to be awakened
from the power saving modes through an incoming call from the modem, a
signal from the LAN, or any event on PME (Power Management Event).
Settings: Enabled and Disabled.
Note: You need to install a modem/LAN card supporting power on
function for Wake up On Ring/LAN function.
Resume By RTC Alarm
This is used to enable or disable the feature of booting up the system on a
scheduled time/date. Settings: Enabled and Disabled.
RTC Alarm Date/Hour/Minute/Second
If Resume On RTC Alarm is set to Enabled, the system will automatically
resume (boot up) on a specific date/hour/minute/second specified in these
fields. Available settings for each item are:
RTC Alarm Date
RTC Alarm Hour
RTC Alarm Minute
RTC Alarm Second
Note: If you change these settings, you must reboot the system until it
enters the operating system and then power off the system. By doing
so, the changed settings will come into effect next time you power on the
system.
Mouse PowerOn Function
The item controls which button on the PS/2 mouse can power on the sytem.
Settings are Disabled, Left button and Right button.
Keyboard PowerOn Function
The item controls which button on the PS/2 keyboard can power on the
sytem. Settings are Disabled, PowerKey, Any Key, and Specific Key.
turned off.
01 ~ 31, Every Day
00 ~ 23
00 ~ 59
00 ~ 59
3-16