Mounting The Nsw On A Rack - ZyXEL Communications NSW Series User Manual

Attaching the Mounting Brackets (NSW100-28P, NSW100-28 and NSW200-28P)
Fig ure 7
Using a #2 Philips screwdriver, install the M3 flat head screws through the mounting bracket holes into
2
the NSW.
Repeat steps
3
You may now mount the NSW on a rack. Proceed to the next section.
4
2.3.3 Mo unting the NSW o n a Ra c k
Position a mounting bracket (that is already attached to the NSW) on one side of the rack, lining up the
1
two screw holes on the bracket with the screw holes on the side of the rack.
Mounting the NSW on a Rack (NSW100-10P and NSW100-10)
Fig ure 8
Chapter 2 Hardware Installation and Connection
1 and 2 to install the second mounting bracket on the other side of the NSW.
NSW Series User's Guide
15