HELIX DSP.3 Manual page 25

HELIX Extension Card slot (HEC slot)
Streaming module, an additional optical digital in-
put, an AUX input or an USB audio input.
it by the new side panel that comes with the HEC
module.
Attention: Install the HEC module only in the
the HEC module in other devices or slots can
result in damage of the HEC module, the signal
processor, the head unit / car radio or other con-
nected devices!
Read in the following the steps how to install a HEC
module:
1. First disconnect all
2. Dismantle the side panel where the USB input
and one Allen screw.
3. Pull out the bottom plate sideways.
4. Prepare the module for installing it into the de-
HEC module.
5.
picture.
6. Make sure that the HEC module is installed
properly and all pins are fully inserted into the
socket.
-
Bluetooth Audio
®
7.
ule with the four Phillips screws and one allen
screw.
8. Bolt the HEC module to the side panel. Precise
mounting information will be found in the in-
9.
10. Turn on the signal processor. The HEC module
Status LED of the HEC module lights up green.
11.
in the DSP PC-Tool software.
-
25