HELIX DSP.3 Manual page 22

Notes for Center Processing with its functions
RealCenter and ClarityXpander
If you want to use the RealCenter and ClarityXpander
function for a center speaker follow the subsequent
steps:
1. You need at least one left and one right analog or
digital input signal.
2. Open the IO menu of the DSP PC-Tool. Route the
left and the right analog or digital input signal (no
sum signal) to the output channels A and B (see
rear or center channel.
Note:
the input signal is a fullrange signal.
3. Generate a summation signal from the same two
input signals and route this to the output chan-
nel G.
nel F remains unconsidered.
4.
tab of the FX menu by placing a tick.
22
-
5. Repeat steps two and three for all routing matri-
ces that are used.
6.
by placing a tick.
Note:
-
put channel G or the output channels F and G.
Notes for Front Processing with its functions
StageXpander, ClarityXpander and StageEQ
Normally, the settings of the StageXpander and
system, it is necessary that these sound features
function.
-
-