Stowing The Jack And Tools; After Completing The Tire Change - Toyota Rush Owner's Manual

330
7-2. Steps to take in an emergency
4 When the tire is hoisted up,
make sure that the tire is
securely fixed.
1
Rock the tire up and down.
2
Turn the tire around.
Confirm directly with your eyes that
the tire is not interfering with any
surrounding parts.
If the tire is loose or not properly
stored, loosen the clamp bolt and
repeat from the step

Stowing the jack and tools

1
Stow the tools.
2 Put the arm onto portion
the bracket, as shown in the
illustration.
Be sure to adjust the arm so that
portions
inside the arm.
3 Turn the joint until the arm is
brought into contact with the
bracket.
After completing the tire change (vehicles with a tire pressure warning
■
system)
The tire pressure warning system must be reset. (→P. 262)
RUSH_OM_General_OMBZ265
.
3
of
of the bracket are
Arm
Bracket
KBTE820423
KBTE820424
KBTE820425