Taking Out The Spare Tire - Toyota Rush Owner's Manual

Taking out the spare tire

1
Assembling the jack handle.
Remove the wheel nut wrench and extensions from the tool bag and
assemble by following these steps.
1
Loosen the bolt using a
spanner.
2
Assemble
and tighten the bolt.
Check that the bolts are firmly
tightened.
3
Assemble
and the wheel nut wrench.
Insert the wheel nut wrench
completely.
2 Lower the spare tire completely
to the ground.
1
Insert the jack handle end
into the screw.
2
Loosen the screw using the
jack handle.
RUSH_OM_General_OMBZ265
7-2. Steps to take in an emergency
the extensions
the extensions
323
KBTE820429
KBTE820430
7
KBTE820431
KBTE820426