BRINKMANN-Cutter pumps SFC1520...3000
WARNING
Risk of injury due to sharp edges on pump
components, i.e. impeller blades!
–
Wear safety gloves!
– Mount the pump body.
– The remainder of the reassembly process is
to be completed in the opposite order of the
prior described dismantling process.
ATTENTION
Assembly help and detailed instruction is de-
manded for the assembly of the pump and
adjusting of the cutting unit!
–
Request the required documents from the
manufacturer.
–
Note torques for the screw connections!
Tightening torques for screwed connections
Thread -
M5
M6
Strength
8.8
8.8 12.9
classes
Tightening
16 Nm
3
4.5
torque
Nm
Nm
Item
(Nm)
82
– Pump Installation. Secure pump against fall-
ing over. i.e. with use of safety straps.
– Reconnect immersion pump as described in
point 5.
ATTENTION
–
When putting the pump back into use,
make sure the direction of rotation is
correct (see point 6.1)!
12 Disposal
When disposing of the pump or the packaging
materials the local and national regulation for
proper disposal must be complied with.
– Prior to its disposal, the pump must be com-
pletely drained and decontaminated if neces-
sary.
BE3185
M8
M10
M12
M16
8.8
10.0
8.8
8.8
30 Nm
80 Nm
60 Nm
20
Nm
Item
Item
Item
18
54, 60,
93
85, 86
Edition
11/2019
13