Yamaha Clavinova CLP-955 Service Manual page 14

CLP-955
17. FRONT RAIL Assembly
17-1 Remove the speaker grille assembly and the top board
(small) assembly. (See Procedure 1.)
17-2 Remove the key cover assembly. (See Procedure 7.)
17-3 Remove the panel assembly. (See Procedure 8.)
17-4 Remove the end block assembly (L, R). (See Procedure 12.)
17-5 Remove the keyboard unit. (See Procedure 16.)
17-6 Remove the four (4) screws marked [82] and the five
(5) screws marked [87]. The front rail assembly can
then be removed. (Fig. 11)
Q
A
A
G G
[82] × 2
[87]
19. SIDE COVER Assembly
19-1 Remove the speaker grille assembly and the top board
(small) assembly. (See Procedure 1.)
19-2 Remove the key cover assembly. (See Procedure 7.)
19-3 Remove the panel assembly. (See Procedure 8.)
19-4 Remove the end block assembly (L, R). (See Procedure 12.)
19-5 Remove the keyboard unit. (See Procedure 16.)
14
A A
G
G
Front rail assembly
[87]
[82]: Bind Head Tapping Screw-B 4.0 × 14 MFZN2BL (VR525900)
[87]: Bind Head Tapping Screw-1 3.5 × 14 MFZN2BL (EP030250)
[25c]: Bind Head Tapping Screw-B 3.8 × 8 MFZN2BL (EP600190)
[80]: Bind Head Tapping Screw-1 4.0 × 25 MFZN2BL (VF573000)
[82]: Bind Head Tapping Screw-B 4.0 × 14 MFZN2BL (VR525900)
18. PL Circuit Board
18-1 Remove the speaker grille assembly and the top board
(small) assembly. (See Procedure 1.)
18-2 Remove the key cover assembly. (See Procedure 7.)
18-3 Remove the panel assembly. (See Procedure 8.)
18-4 Remove the end block assembly (L, R). (See Procedure 12.)
18-5 Remove the keyboard unit. (See Procedure 16.)
18-6 Remove the front rail assembly. (See Procedure 17.)
18-7 Remove the one (1) screw marked [25c]. The PL circuit
board can then be removed from the front rail assembly.
(Fig. 11)
A Q
A A
G G
G
[87]
(Fig. 11)
19-6 Remove the front rail assembly. (See Procedure 17.)
19-7 Remove the four (4) screws marked [80] and the three
(3) screws marked [82]. The side cover assembly can
then be removed. (Fig. 12)
* The right and left side cover assemblies can be likewise
removed.
Side cover assembly (Left)
[80]
(Fig. 12)
[82] × 2
[25c]
[82]