Console Installation And Set Up; Cadence (Rpm) Sensor Installation; Heart Rate Belt Bluetooth Pairing; Service And Maintenance - Precor Spinner Ride Series Service Manual

Console installation and Set Up

Batteries Required: three AAA batteries.
l
For instructions to install the console, see the the SPINNING® STUDIO Owner's Manual
"Console Setup",see

Cadence (RPM) sensor installation

Batteries Required: one CR2032 lithium coin cell battery.
l
For instructions to install the cadence sensor, see the Cadence Sensor Installation chapter in
the SPINNING® STUDIO Owner's Manual, see

Heart Rate Belt Bluetooth Pairing

For instructions to use and pair a bluetooth heart rate belt, see the Pairing with your Heart
Rate Belt chapter in the Operators Guide, see

Service and Maintenance

All information regarding the console installation, operation, service, and maintenance is
provided in the SPINNING® STUDIO Owner's Manual, see
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Operator's Guide.
Console installation and Set Up
Operator's Guide.
Operator's Guide.
Operator's
7 Spinning® Studio Console
Guide.
Page 64