Deleting A Channel From Memory; Scanning - Uniden ATLANTIS 250 Owner's Manual

Deleting a Channel from Memory

1 Select the channel to delete from
memory by pressing the L or M button.
2 Press the MEM button.
MEM disappears from the display.

Scanning

1
To begin scanning the programmed
channels, press the SCAN button. SCAN
and TRIPLE appear on the display.
2
To stop scanning, press the SCAN
button once more. SCAN and TRIPLE
disappear from the display.
• Scanning starts from the lowest to highest channel and stops
when it finds an active channel. It remains on that channel until
the transmission ends, then resumes scanning after a 2 second
delay period.
• When in the scan mode, the unit automatically activates the
Triple Watch feature. To deactivate Triple Watch from the
scanning mode, press and hold the 16/9/TRI button for
2 seconds. TRIPLE disappears from the display.
17