40 Receive Channels; Manual Programming; Deleting A Programmed Receive Channel; Roger Beep - Uniden uh095sx Owner's Manual

UNIDEN Model uh095sx Dual Band (UHF CB/AM CB) Radio
Operation

40 Receive Channels

The uh095sx also has 40 receive only channels (CH41 to CH80) which can be
programmed with frequencies ranging from 450-512MHz (in 12.5kHz steps). When
programmed they are added to the FM band channels.
If you know the frequency you may store it manually.

Manual Programming

Turn power off. Press and hold
while turning power back on.
The channel indicator flashes the
lowest available empty channel. You
may use the or to select
another channel.
Press /ENTER . The first digit of the frequency indicator
MENU
flashes. Press or
Press or
SCAN MON
to change digits.
When finished press
MENU
select next channel for programming or press and hold
A confirmation tone sounds. The channel is automatically entered into OS scan
memory.

Deleting a Programmed Receive Channel

Follow the steps in Manual Programming to enter a frequency for a desired channel.
Select 0 for the first frequency digit and then press
select another channel or press and hold
mode.

Roger Beep

Roger Beep is a BEEP that is sent to
notify the end of transmission (both
PTT and VOX transmission.)
Press eight times.
MENU
Press or to display ON.
Press and hold /ENTER to store
MENU
the new setting.
If a button is not pressed within 10 seconds the uh095sx will
automatically exit the Menu Mode.
MON
to select first digit.
to move left or right between digit positions and press
/ENTER, the channel indictor flashes. Press
/ENTER to exit programming
MENU
12
or
MENU
/ENTER to store setting.
/ENTER. Press
MENU
or
to
or to