Charging The Battery Pack - Uniden ATLANTIS 250 Owner's Manual

Charging the Battery Pack

Your marine radio is powered by a specially designed Ni-MH
battery pack.
• Before operating the ATLANTIS 250, charge the Ni-MH battery
pack for 16 hours without interruption with the Adapter.
1 Place the ATLANTIS 250 in the Cradle.
Make sure your radio is OFF.
2 Plug one end of the AC adapter into the
wall outlet and the other end into the
Adapter jack on the back of the ATLANTIS
250.
3 Charge the battery for 16 hours.
• The charger won't overcharge the battery pack. After 16 hours
without interruption, charging is completed.
• Be sure to replace the rubber cap after charging in order to
secure the waterproof seal.
• The radio will not charge the battery while on and receiving
incoming voice traffic.
• When you mount the Cradle on your boat, use the DC adapter
instead.
• The jack is for charging only. If the battery level is low, the radio
needs to charge before use.
10
ATLANTIS 2 5 0 ATLANTIS 2 5 0 ATLANTIS 2 5 0 ATLANTIS 2 5 0 ATLANTIS 2 5 0
WX WX WX WX WX
SCAN SCAN SCAN SCAN SCAN
UIC UIC UIC UIC UIC MEN MEN MEN MEN MEN
ALERT ALERT ALERT ALERT ALERT
16/9 16/9 16/9 16/9 16/9
1/5W 1/5W 1/5W 1/5W 1/5W
TRI TRI TRI TRI TRI
LOCK LOCK LOCK LOCK LOCK
MIC MIC MIC MIC MIC
ATLANTIS 2 5 0
WX
SCAN
ALERT UIC MEN
16/9
1/5W
TRI
LOCK
MIC