Using the Alkaline Battery Case
When needed, you can use the battery case with Alkaline AA
batteries (not included) instead of the rechargeable battery pack.
To install the batteries:
1
Remove the battery case cover by pulling the
2 halves apart applying your fingers to the
projections.
2
Install 6 AA Alkaline batteries (not included)
into the battery case.
Be certain to follow the + and – symbols in
the compartment.
3
Replace the battery case cover as follows
until it clicks into place.
Attaching the Beltclip
1
Hold the beltclip in the direction as
illustrated.
2
Apply it to the hanger piece on the back
of the radio. Then slide it up.
3
When you hear a click, the beltclip is
firmly attached.
4
To take the beltclip off the radio, turn it
upside down and slide it up.
9