Getting Started; Battery Installation - Uniden UH038SX-2NB Owner's Manual

Getting Started

Uniden does not represent this product to be waterproof.
Do not expose this product to Rain or Moisture.
NOTE

Battery Installation

Your UH038SX-2NB unit uses the included NiMH battery pack for power.
The unit can be powered with optional 4 AAA ALKALINE batteries.
If you don't use the UH038SX-2NB for long periods, Uniden
recommend removing the batteries. The UH038SX-2NB is
designed to retain the previous user settings. This feature will
continue to use a small amount of battery power while the
NOTE
unit is switched off.
To avoid damage to the unit do not mix old and new
batteries.
To install the batteries:
1. Make sure your radio is off.
2. Release the battery cover clip, then remove the
battery cover.
3. Insert NiMH battery pack according to the
orientation on the battery pack.
OR
Insert 4 AAA ALKALINE batteries (not included)
according to the polarity symbols inside the
battery compartment.
4. Align the battery cover tabs with the
UH038SX-2NB tab holes then replace the cover clip.
Do not charge alkaline or non rechargeable batteries.
NOTE
UNIDEN UH038SX-2NB
2
UHF CB Transceiver