Installing The Door Handle - Crosley XRS Owner's Manual And Installation Instructions

Installation Instructions

INSTALLING THE DOOR HANDLE

PLASTIC HANDLE
1A
Install the handle fastener into the hole on the
freezer and fresh food doors . The fasteners
correspond with the handle side (the side
opposite the hinge) .
STAINLESS STEEL HANDLE
1B
Attach plastic bushing to the door with the
screw on both freezer and fresh food doors . The
fasteners correspond with the handle side (the
side opposite the hinge) .
14
Handle Fastener
Bushing
with Screw
HANDLE INSTALLATION
2
1 . Attach handle to freezer door by sliding handle
up onto plastic bushing or fastener with the
screws at the bottom of the handle .
2 . Attach handle to fresh food door by sliding
handle down onto plastic bushing or fastener
with the screws at top of handle .
NOTE: Be sure to remove
film before handle installation,
if applicable)
BADGE AND PLUG BUTTON
3
INSTALLATION
1 . Place a plug button on the opposite side of the
fresh food door across from the handle .
2 . Remove the backing on the Crosley badge and
carefully place it covering the hole opposite the
handle on the freezer door . Be sure the badge
is oriented the correct way before applying it to
the door .
Badge
Plug
button
49-1000502 Rev. 0