Door Handle Mounting Instructions - Crosley CRSS262QB Use & Care Manual

1. remove handles from cartoning and any other protective
packaging.
2. Position freezer handle end caps over upper and lower
preinstalled shoulder bolts (a) that are fastened into door,
ensuring the holes for the set screws are facing towards the
refrigerator door.
3. While holding handle firmly against door, fasten upper and
lower allen set screws (B) with supplied allen wrench.
4. repeat steps 2 and 3 to install refrigerator handle. ensure the
holes for the set screws are facing towards the freezer door.
5. NOTE: All set screws should be tightened and subflush (allen
set screw should be seated just below the surface of the end
cap) of handle end cap. The end caps should be drawn tight to
freezer and refrigerator doors with no gaps.

door HANdLE mouNtING INStructIoNS

Door handle Mounting Instructions
Freezer Upper End Cap
Freezer Lower End Cap
Refrigerator Upper End Cap
Refrigerator Lower End Cap
8