Activating The Message Alert; Activating Call Screening; Setting A Security Code Or Personal Identification Number (Pin) - Uniden DSS7955+1 Series Owner's Manual

Activating.the.Message.Alert.
The Message Alert feature sounds a short alert tone every 5 seconds whenever you have a new message.
To turn on the message alert:
) Press the MENU soft key. Select the ANSW. SETUP menu, and then the MESSAGE ALERT submenu.
2) Move the cursor to select ON or OFF.
Press the OK soft key. You will hear a confirmation tone.
3)
Activating.Call.Screening
Your phone allows you to listen to callers leaving you a message. This Call Screen feature can be turned on or off.
) Press the MENU soft key. Select the ANSW. SETUP menu and then the CALL SCREEN submenu.
2) Move the cursor to select ON or OFF.
3) Press the OK soft. You will hear a confirmation tone.
Setting.a.Security.Code or Personal Identification Number (PIN)
To play your messages from a remote location, you will need to enter a two-digit Personal Identification Number
(PIN) or PIN Code.
) Press the MENU soft key. Select the ANSW. SETUP menu, and then the SECURITY CODE submenu.
2) Enter a two-digit security code (00-99) using the number keypad [0-9].
3) Press the OK soft. You will hear a confirmation tone.
55