Terminology Used In This Manual - Uniden DSS7955+1 Series Owner's Manual

Terminology.used.in.this.Manual
The handset and the base are not in use. If the handset is on the cradle or [ /flash] or [ ].on the
Standby
handset or [ ] on the base is not pressed, no line has been activated. No dial tone is present.
Caller ID is available from your Telephone provider and is offered to users on a subscription basis.
CID
With this service and a display on your cordless phone, you will be able to see the incoming caller
information such as name and phone number.
Caller ID with Call Waiting is available by subscription from your Telephone provider. With this
CID/CW.or.
service, you will be able to view incoming caller information while on a call with another user.
CIDCW
This will allow you the ability to select to talk to this user and put your existing party on hold or
make the decision to ring them back.
DirectLink If you have accessory handsets on your system, you can use two handsets as 2-way radios.
Accessory. This phone system is expandable and will support a total of ten (0) handsets to one base.
Handsets The DSS7905 accessory handset is compatible with this model.
Global Settings apply to all registered handsets and the base. If you change something under
Global.
the global menu, you change it for all handsets and the base. Only one handset or the base can
settings
change global settings at a time, and you have to make sure the phone is not currently being
used.
Station Any handset or the base.
Talk A telephone line has been activated on the handset or base, enabling a dial tone.
5