Uniden DSS7955+1 Series Owner's Manual page 29

4) Enter.the.number.for.this.entry.
Once you have stored a name, STORE/EDIT NO. appears next. Use the number
keypad, [#/>], [ /<] , or the DELETE soft key to enter the phone number ; the
tone
phone number can contain up to 20 digits. If you need the phone to pause
between digits when it's dialing (for example, to enter an extension or an access
code), press the.PAUSE.soft key to insert a two-second pause. You will see a P
in the display. You can also use more than one pause together if two seconds is
not long enough. Each pause counts as one digit. Press the OK soft key when
you are finished.
5) Assign.a.distinctive.ring.tone.for.this.entry.(Distinctive.Ring).(Handset.only).
You can attach a personalized ring tone to each phonebook entry; the phone will
use this ring tone when this person calls. Move the cursor to highlight one of the
20 different ring tone options. As you highlight each ring tone, you will hear a
sample of that tone. When you hear the ring tone you want to use, press the OK
soft key. If you do not want to use a distinctive ring tone for this phonebook entry,
select the NO SELECTN option, and the phone will use your standard ring tone
setting.
6) Assign.this.entry.to.a.Speed.Dial.number.(Speed.Dial).
Your phone has 0 speed dial numbers, 0 to 9. Move the cursor to select the
speed dial number you want to assign to this phonebook entry, and press the OK
soft key. Select NO SELECTN if you do not want to assign this entry to a speed
dial number. Press the OK soft key.
7) You will hear a tone confirming that the new phonebook entry has been stored,
and DONE! appears in the display.
Note: When the shared memory is full, the oldest Caller ID message is overwritten.
28