Husqvarna T435 Workshop Manual page 37

Dismantling the carburettor
1
Unscrew the air fi lter housing, the air fi lter holder
and the fi lter. Dismantle the handle part by loose-
ning screws A. Remove the throttle lockout B.
Remove throttle C and spring D. Loosen carburet-
tor screw E. Remove guide F, see fi gure 40.
2
Remove the carburettor and remove the cover for
choke outlet H.
3
Turn the throttle actuator rod K downwards and
guide it out, see fi gure 42.
4
Remove fuel hose J, see fi gure 42.
Fig 40
Fig 41
Fig 42
Repair instructions
37
English –